Table of Contents
Advertisement
Installing and Connecting the Router
This document describes how to install and connect the Cisco 4451-X Integrated Services Routers
(ISRs) to LAN, WAN, and Voice networks. The following sections provide technical details.
Installing the Router, page 3-4
•
Chassis Grounding, page 3-11
•
Connecting Power, page 3-12
•
•
Connecting to a Console Terminal or Modem, page 3-14
•
•
Connecting to the Auxiliary Port, page 3-19
•
•
Connecting WAN, LAN, and Voice Interfaces, page 3-20
To see translations of the warnings that appear in this publication, see the
Warning
Safety Information for the Cisco 4451-X Integrated Services Routers
qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030
This unit might have more than one power supply connection. All connections must be removed to
Warning
de-energize the unit. Statement 1028
Warning
Blank faceplates and cover panels serve three important functions: they prevent exposure to
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement
1029
Warning
Hazardous network voltages are present in WAN ports regardless of whether power to the unit is OFF
or ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables,
detach the end away from the unit first. Statement 1026
OL-27644-01
3
C H A P T E R
Regulatory Compliance and
document. Only trained and
Cisco 4400 Series Hardware Installation Guide
3-1
- Quick Links:
- Cisco Isr 4451-X Chassis
Hide quick links:
Advertisement
Table of Contents
