Cisco 1900 series Hardware Installation page 71

Chapter 4 Installing and Connecting the Router
Note
Figure 4-12
1 USB 5-pin mini Type-B console port
3 USB Type-A connector
Connect the end of the cable with the DB-9 connector (or USB Type-A) to the terminal or PC. If your
Step 2
terminal or PC has a console port that does not accommodate a DB-9 connector, you must provide an
appropriate adapter for that port.
To communicate with the router, start a terminal emulator application.
Step 3
OL-19084-02
You must use either the USB port or the RJ-45 port. Not both simultaneously. See
Console" section on page
port.
Connecting the Console Cable to the Router
EN
DO NO T
RE MO VE
NE TW OR DU RIN G
K OP ER
AT ION
DO NO T
RE MO VE
NE TW OR DU RIN G
K OP ER
AT ION
2
2
2-6. When the USB port is used it takes priority over the RJ-45 EIA
S
L
G
E
0
/
0
GE 0/1
EN
EN 1
US B
CO NS OL
E
0
1
2 USB 5-pin mini Type-B to USB Type-A
console cable
Cisco 1900 Series Hardware Installation
Connecting to a Console Terminal or Modem
"USB Serial
3
4-17