Installing And Connecting The Router - Cisco 2900 series Installation Manual

Installing and Connecting the Router

This document describes how to install and connect Cisco 2900 series and Cisco 3900 series integrated
services routers (ISRs) to LAN, WAN, and Voice networks. The following sections provide technical
details.
Installing the Router, page 3-4
•
Chassis Grounding, page 3-15
•
Connecting Power, page 3-18
•
Connecting to a Console Terminal or Modem, page 3-30
•
Installing the Cisco Microsoft Windows USB Device Driver, page 3-35
•
Uninstalling the Cisco Microsoft Windows USB Driver, page 3-37
•
Connecting to the Auxiliary Port, page 3-38
•
Connecting WAN, LAN, and Voice Interfaces, page 3-41
•
To see translations of the warnings that appear in this publication, see the
Warning
Safety Information for Cisco 2900 Series Integrated Services Routers
Safety Information for Cisco 3900 Series Integrated Services Routers
qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030
This unit might have more than one power supply connection. All connections must be removed to
Warning
de-energize the unit. Statement 1028
Blank faceplates and cover panels serve three important functions: they prevent exposure to
Warning
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement
1029
Warning Hazardous network voltages are present in WAN ports regardless of whether power to the unit is OFF
or ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables,
detach the end away from the unit first. Statement 1026
OL-18712-01
C H A P T E R
Regulatory Compliance and
or the Regulatory Compliance and
document. Only trained and
Cisco 2900 and 3900 Series Hardware Installation
3
3-1