Panel Unit - Epson STYLUS CX3500 Service Manual

EPSON Stylus CX3500/CX3600/CX3650/CX4500/CX4600

4.3.5 Panel Unit

V External View
Panel
Unit
Panel
Sheet
Screwdriver insertion position
1
2
Hooks
Dowels
Copy-Button
Figure 4-13. Panel Unit Removal
DISASSEMBLY AND ASSEMBLY
C.B.S 3x6 F/Zn
(7±1kgfcm)
CN12
Hooks
Notches
CN1
Panel Board
Power-Button
S-Buttons
V Part/Unit that should be removed before removing Panel Unit.
Document Cover / Scanner Unit
V Removal procedure
1. Peel off Panel Sheet from Panel Unit by using a precision screwdriver (-).
When peeling off Panel Sheet, free it by inserting the screwdriver at
C A U T I O N
the place shown by the figure.
Paste new Panel Sheet to Panel Unit.
2. Remove the screws (x3,
Panel FFC
3. Release the hooks (x3,
Align the hooks (x3,
Housing Upper.
4. Release Panel FFC from connector (CN12) of Main Board, and then remove
Panel Unit.
When removing Panel Unit, Panel FFC will be hard to insert when
C A U T I O N
disconnecting it from Panel Board side (CN1).
Panel FFC
5. Release the hooks (x2,
Align the positioning holes (x2) of Panel Board with the dowels (x2,
) of Panel Housing.
6. Remove FFC from connector (CN1) of Panel Board.
7. Remove S-Buttons (x4), Copy-Button and Power-Button from Panel Housing.
(Stylus CX4500/CX4600 equipped with 5 S-Buttons.)
Disassembly
) for securing Panel Unit.
) of Panel Unit in order shown by figure.
) of Panel Unit with the notches (x3,
) securing Panel Board, and then remove Panel Board.
Revision A
) of
126