Pf Motor - Epson STYLUS CX3500 Service Manual

EPSON Stylus CX3500/CX3600/CX3650/CX4500/CX4600

4.3.16 PF Motor

V External View
Acetate tape
CR Motor
Spur Gear 32.4
PF Scale
Double
side
tape
Ferrite Core
and Slot
Spacer (4.1x0.5)
Spur Gear 30.8
Pinion gear
Figure 4-38. PF Motor Removal
DISASSEMBLY AND ASSEMBLY
PF Motor
C.P 3x4 F/Zn (4±0.5kgfcm)
Lot No.
V Part/Unit that should be removed before removing PF Motor.
Document Cover / Paper Support Assy. / Scanner Unit / Panel Unit /
Housing Upper / Printer Mechanism / Main Board Unit
V Removal procedure
1. Peel off the acetate tape (x1) from CR Motor, and then release CR Motor
Connector Cable and PF Motor Connector Cable.
2. Remove Ferrite Core (x1) of PF Motor Connector Cable from the slot (x1) of
ASF Unit.
3. Peel off PF Scale secured to Spur Gear 32.4 with the double-sided tape (x1).
4. Remove Spacer (4.1x0.5) for securing Spur Gear 30.8, and then remove Spur
Gear 30.8 from Main Frame.
Do not damage the following locations.
C A U T I O N
T
Pinion gear of PF Motor
T
PF Scale
T
Spur Gear 30.8
5. Remove the screws (x2,
Motor from Printer Mechanism.
T
Assemble so that label with recorded Lot Number faces upward.
T
Make sure that there is no gap between PF Motor and Main
Frame.
Disassembly
Revision A
) for securing PF Motor, and then remove PF
148