Operations - Epson STYLUS CX3500 Service Manual

EPSON Stylus CX3500/CX3600/CX3650/CX4500/CX4600

1.6.3 Operations

1.6.3.1 Stand-alone Copy / Memory Card Print
The functions of this unit caused by each button in stand-alone copy mode or memory card print mode are described in the following table.
Button
Power Button • Turn on or off this unit.
• Start or advance ink cartridge (I/C) exchanging procedure.
V Case
T [All inks are enough.]
T [Ink low, Ink out, Without I/C error]
Ink Button
T [CR is in some color's ink check position.] Move CR to next color's ink check position or I/C exchange position.
T [CR is in I/C exchange position.]
Ink Button • Start cleaning head procedure.
(Holding over 3
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in error status except for paper out error, memory card error, index sheet error, PG error.
sec.)
• Make transition from "Stand-alone copy" mode to "Memory card print" mode and select and
light "Print Index Sheet", or "Print All / DPOF" if DPOF file exists in the card.
• Turn off both 7-seg. LED and "Fit to Page" LED.
Memory Card
• Select "Plain Paper" and "Letter (or A4)"
Button
(only for Stylus
CX4500/CX4600)
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in error status except for memory card error, index sheet error, PG error.
• Set number of copies incrementally and indicate it on 7-seg. LED.
V Case
T [1 to 8]
Copy Button
Add 1 and the number becomes 2 to 9.
T [9]
Indicate "-", which means 100 copies.
T [-]
Reset to "1".
• Alternate paper type of "Plain Paper" and "Photo Paper".
Paper Type Button
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in error status.
PRODUCT DESCRIPTION
Table 1-44. Operations
Stand-alone Copy
Move carriage (CR) to I/C exchange position.
Move CR to each color's ink check position if that color's I/C is ink low or ink out or without I/C. CR moves in the order of Cyan, Magenta, Yellow,
Black.
Move CR to standby position.
Control Panel
Function
Memory Card Print (only for stylus CX4500/CX4600)
• Change to next "Memory card print" function.
V Case
T [Print Index Sheet]
Change to "Print From Index Sheet", and change paper type and
paper size to the one last set in "Print From Index Sheet" or "Print
All / DPOF".
T [Print From Index Sheet] Change to "Print All / DPOF".
T [Print All / DPOF]
Change to "Print Index Sheet", and change paper type and paper
size to "Plain Paper" and "Letter (or A4)".
• Make transition from "Memory card print" mode to "Stand-alone copy" mode and set number of
copies to "1".
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or
in error status except for memory card error, index sheet error, PG error.
• Alternate paper type of "Plain Paper" and "Photo Paper" which will be used in "Print From Index
Sheet" or "Print All / DPOF".
• Invalid in "Print Index Sheet", and then it is fixed to "Plain Paper".
Revision A
43