Epson STYLUS CX3500 Service Manual page 98

EPSON Stylus CX3500/CX3600/CX3650/CX4500/CX4600
Occurrence
timing Detailed phenomenon
CR position
• Power on
The Scanner Unit does not initialize
when the power is turned on.
• Anywhere
TROUBLESHOOTING
Table 3-15. Check point for the Fatal error according to each phenomenon
Defective
unit/part name
1. Check if the Scanner Motor Connector Cable is
connected to CN10 on the Main Board.
2. Check if the coil resistance of the Scanner Motor is about
Scanner Motor
37Ω by using the tester
Scanner Motor
3. Check if the Scanner Motor Connector Cable is not
damaged.
Troubleshooting
Check point
CN10
Scanner Motor
Connector Cable
(refer to Table 3-1).
Revision A
Remedy
1. Connect the Scanner Motor Connector Cable
to CN10 on the Main Board.
2. Replace the Scanner Motor with a new one.
3. Replace the Scanner Motor with a new one.
98