Epson STYLUS CX3500 Service Manual page 93

EPSON Stylus CX3500/CX3600/CX3650/CX4500/CX4600
Occurrence
timing Detailed phenomenon
CR position
• Operation
The drive of the PF Motor is not
transmitted to the LD Roller Shaft.
• –
The LD Roller is not set to the ASF
• Operation
home position and paper is always
loaded from the ASF Unit during the
• –
paper loading sequence.
TROUBLESHOOTING
Table 3-12. Check point for the paper out error according to each phenomenon
Defective
unit/part name
1. Check if the Compression Spring 2.36 does not come off
in the Change Lever.
Ink System Unit
1. Check if the tip of the Change Lever is not damaged.
Ink System Unit
Troubleshooting
Check point
Change Lever
Compression Spring 2.36
Revision A
Remedy
1. Replace the Ink System Unit with a new one.
1. Replace the Ink System Unit with a new one.
93