INSTALLATION PROCEDURE
Installation Procedure
CAUTION
To avoid serious injury, do not connect the power plug to the machine until
you are instructed to do so.
1. Unpack the machine and remove all the wrapping.
[C]
[A]
[D]
2. When you install the optional table:
• Mount the machine on the table. There are two screws [A] packed with the
table.
• Lock the caster [B]
• Fix the caster lock stays [C] and tighten the screws [D]
• Attach the stabilizing brackets [E] (these help to prevent the machine from
falling over).
C267
C267I102.WMF
[B]
1-6
[E]
[C]
C267R084.WMF
SM