Ricoh C231 Service Manual page 305

Code LCD Display
MOTOR: Master Feed
35 Low Speed
MOTOR: Master Feed
36 Normal Speed
MOTOR: Scanner
37
SIG: VHD on
41
MC: Paper Feed
42
MOTOR: Paper
43 Delivery
MOTOR: Clamper
44 Close
MOTOR: Clamper
45 Open
MOTOR: Pressure
46 Plate ON
MOTOR: Pressure
47 Plate OFF
SM
Turns on the master feed motor at low speed.
Out-35
Turns on the master feed motor at normal speed.
Out-36
Turns on the scanner motor.
The scanner moves to the original scanning
position for ADF mode when the Start key is
pressed. It returns to home position when the
Start key is pressed again.
Applies thermal head voltage.
Power is applied by pressing the Start key. It is
Out-41
stopped by pressing the Clear/Stop key.
Turns on the paper feed clutch.
Out-42
Turns on the paper transport motor while the
Start key is pressed.
Out-43
Turns on the clamper motor and moves the
clamper to the close position.
Out-44
Turns on the clamper motor and moves the
clamper to the open position.
Out-45
Turns on the pressure plate motor and moves the
plate to the lower limit position.
Out-46
Turns on the pressure plate motor and moves the
plate to the home position.
Out-47
4-15
INPUT/OUTPUT CHECK MODE
Description
C231/C237/C238