Ricoh C231 Service Manual page 603

4.2.6 MASTER EJECT
Name
Drum Master Sensor
Pressure Plate Limit
Sensor
Pressure Plate HP
Sensor
Master Eject Box
Sensor
Master Eject Sensor
Master eject unit
safety switch
4.2.7 MASTER MAKING UNIT
Name
Master Set Cover
Sensor
Cutter HP Sensor
Master making unit
set switches
Master End Sensor
Thermal Head
Temperature
SM
ELECTRICAL COMPONENT DEFECTS
State
On The "B" jam indicator is lit when print is
started. (Print without master)
Off Master does not eject
The "D" jam indicator is lit.
Open E-12 is displayed.
Shorted The "Full eject master" indicator is lit.
Open E-12 is displayed.
Shorted E-12 is displayed.
On The master is ejected, even if there is no
master eject box
Off "No master eject box" is displayed.
"Full eject master" indicator is lit.
Open The "B" and "E" jam indicator is lit.
Shorted The "B" jam indicator is lit
Open "Unit open" is displayed.
Shorted
State
Open The "D" jam indicator is lit.
The "open cover" indicators are lit.
Shorted
Open E-01 is displayed.
Shorted E-01 is displayed.
Either of sensors is work correctly, the
On
machine move correctly.
Off "Not set making unit" is displayed
Master making can start even if there is no
White master roll, but the "D" jam indicator will
be lit.
Black The "load new master roll" indicator is lit.
Open E-09 is displayed.
Short E-04 is displayed.
4-5
Symptoms
Symptoms
C267