Ricoh C231 Service Manual page 294

No. Display
16 LCD
Contrast
Adjust
***17 Not used for the C237 model
**18 Master Type Selects the master
***19 Not used for the C237 model
*20 Buzzer On
*21 Prints/Master
Cost
22
Home
Position
Adjust
23
Plot Position
Adjust
*25 Clear 2 In 1
26
Feed Timing
Adjust
27
ADF Current
Down
28 Paste
Shadow
Erase
C231/C237/C238
Function
Changes the LCD contrast.
production district.
Turns the beeper on.
Adjusts the cost ratio of
masters to prints for
accounting purposes.
(When SP4 is set at 1,
This function cannot be
used.)
The drum home position
(the master eject position)
changes.
The drum stop position for
the master making changes.
Selects whether to reset the
Combine 2 Original mode
automatically after master
making.
Adjusts the registration
motor on timing for better
paper registration.
Lowers the current to the
ADF motor.
Adjusts the Paste Shadow
Erase level that can be set
with the key on the
operation panel. The
shadows of pasted-up
edges on originals lighten.
4-4
SERVICE PROGRAM TABLE
Factory
Settings
Setting
17 to 24 21
0:Overseas 0
1:Japan
0: No 0
1: Yes
0 to 50 0
0 to 9 5
0 to 9 3
0: No 0
1: Yes
0 to 7 3
0: No 0
1: Yes
0: Standard 0
1: Light
2: Lighter
Comments
Never change
the setting.
The set
number (0 to
50) is
automatically
added to the
key counter
each time a
master is
used.
Never change
the setting.
Never change
the setting.
If the ADF
motor vibrates
due to a part
variation
causing noise,
reduce the
motor current
with this
mode.
SM