Ricoh C231 Service Manual page 417

Rev. 12/2004
SP6-23 through 6-27 Settings Summary
No.
6-23 Paper registration – each speed
6-24 Paper registration – each speed (Skip feed)
6-25 Paper registration – each speed (A4 drum)
6-26 Paper registration – each speed (A4 drum: Skip)
6-27 Press roller buckle
⇒
5.7.8 SP6-36 AND 37: MASTER LENGTH A3/A4
Purpose: To make sure smudges do not occur on the rear side of the copy paper.
Settings: -15 to 15 mm (Default: 0)
- Lowering this setting decreases the length of the master.
NOTE:
- Lower settings will decrease smudges, but may cause an ink leak
from the rear of the drum.
NOTE: SP6-36 and 37 require firmware version 1.34 or later.
SM
Menu Items
5-19
MAIN MENU NO.6: ADJUSTMENT
Speed Default
15 rpm 103
30 rpm 107
60 rpm 93
75 rpm 82
90 rpm 70
105 rpm 59
120 rpm 45
15 rpm 103
30 rpm 107
60 rpm 94
75 rpm 84
90 rpm 73
105 rpm 63
120 rpm 50
15 rpm 103
30 rpm 107
60 rpm 96
75 rpm 85
90 rpm 75
105 rpm 62
120 rpm 46
15 rpm 103
30 rpm 107
60 rpm 97
75 rpm 85
90 rpm 73
105 rpm 61
120 rpm 47
15 rpm 1.00 0.00 to 1.00
30 rpm 1.00
60 rpm 0.88
75 rpm 0.87
90 rpm 0.85
105 rpm 0.86
120 rpm 0.88
C231/C237/C238
Settings
0 to 255
0 to 255
0 to 255
0 to 255