Usage Of This Manual - Cub Cadet 7530 Maintenance Manual

1
1.4

Usage of this Manual

This manual describes procedures and inspection items for maintenance and adjustment of 7530 and 7532.
Structure
This manual consists of groups and sections.
Group
A group categorizes the information by components of vehicle.
This manual is categorized into 4 groups.
1. Introduction
2. Chassis
3. Hydraulic System
4. Electrical Equipment
The group number is indicted at the left side of the section number.
Section
Each group is divided into sections.
A section is categorized by components or systems. The number following the group number indicates the
categorized system.
Maintenance and Repair
Block-diagrams and illustrations of parts are used for easier understanding.
Required service value is indicated along the procedure to avoid troubles of referring to other sections.
Numbers are marked in the illustration for the parts with specific removal procedure to correspond to the procedure
of the same number.
Only the repair procedures corresponding to one of the below conditions are described.
• In case of difficulty to identify the component or to start the work
• In case of requiring specialized tools for removal and installation
• In case of requiring special caution for safety or potential product damage during removal and installation
• In case of difficulty of understanding the removal/installation method
• In case of requiring a test or calibration after installation
The reason of no indication of repair procedures is due to one of the below conditions.
• In case of not corresponding to the above conditions. Complicated work or work requiring special caution for
safety or potential product damage or specialized tools.
• In case of parts not repairable due to requiring special device for adjustment after repair.
• In case a replacement to new parts is recommended compared to parts overhaul for economical reason.
• In case of existing other maintenance reference issued by Cub Cadet Corporation due to its technical reasons
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Introduction
2