8.3.2
Installation of Steering Unit Hose
1. Assemble 4 units of steering hoses (T, P, L, and R) with caution not to misassemble. Tighten the fittings on
both sides of hose with torque at 29.4 to 39.2N•m {300 to 400kgf•cm, 21.7 to 28.9lbf•ft}.
2. Fix the steering hose R and L with some slacks using clamp to prevent obstruction from each other when the
front axle assembly swings.
After connecting the hoses, make sure that the tires steer left by left-operation of the steering
wheel.
Steering wheel
Return hose
Steering unit
(Orbit roll)
Pressure hose
Hose L
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Steering
Steering shaft
Hose R
Hose L
119
CAUTION
Left port
Tank port
T
Hose R
8
L
Right port
R
Pump port
P
GZ3W27-006