Cub Cadet 7530 Maintenance Manual page 54

2 Installation and Removal of Engine Parts
Glow control system
Fuel pump
Oil pressure switch
Air intake hose
Fuse box
Air heater relay
Alternator
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Water temperature
sensor
Solenoid valve
for fuel cut
GZ3W21-012
GZ3W21-013
Air heater control box
GZ3W21-014
Tachometer cable
Starter
GZ3W21-015
14
12. Disconnect the harness E from the following engine
parts.
From engine right side
• Water temperature sensor
• Solenoid valve for fuel cut
• Glow control system
• Fuel pump
• Oil pressure switch
13. Remove the air intake hose.
14. Disconnect the harness E from the following engine
parts.
From engine front side
• Fuse box
• Air heater relay
• Air heater control box
From engine left side
• Starter
• Alternator
• Tachometer cable