Chapter 4: Body Panels; What Is Covered By This Chapter; Hood; Hood Removal - Cub Cadet 900 Series Professional Shop Manual

What is covered by this chapter

The intent of this chapter is to describe the removal
and disassembly of the major body panels on the trac-
tor.
•

Hood

• Seat
• Fenders
• Dash panel
NOTE: It is not absolutely necessary to remove
the mowing deck for any procedures covered in
this section. The technician may choose to
remove the mowing deck so that it is easier to
reach some parts of the tractor.
NOTE: The hood described in this section is the
"A" style hood. Other styles may be produced
for different markets (e.g.: over-seas) or future
style changes. See Figure 4.1.
Figure 4.1

CHAPTER 4: BODY PANELS

"A" style hood
Hood

Hood removal:

1. The hood is front-hinged. See Figure 4.2.
Lift here
Figure 4.2
2. Open the hood by lifting the rear edge to tilt it for-
ward.
3. Disconnect the headlight wires. See Figure 4.3.
Inset: headlight detail
Figure 4.3
NOTE: The ground terminals and power termi-
nals on the headlights are two different sizes.
The green wires (ground) fit the larger terminals.
The red wires (power) fit the smaller terminals.
BODY PANELS
15