Inspection And Adjustment Of Front Axle - Cub Cadet 7530 Maintenance Manual

7.4

Inspection and Adjustment of Front Axle

7.4.1 Backlash
1. Inspect the backlash for pinion gear and lateral clearance of deferential case and change or adjust the ones
exceeding the referential value.
Backlash for pinion gear and side gear
Lateral clearance of deferential case
Backlash for pinion shaft and deferential ring gear
2. Inspect the backlash for bevel gear and adjust the ones exceeding the referential value.
Backlash for deferential shaft bevel gear 14T and kingpin shaft
bevel gear (top) 18T
Backlash for axle shaft bevel gear 32T and kingpin shaft bevel
gear (bottom) 12T
Clearance
Clearance
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Front Axle
Item
Item
7.4.2
Clearance bet. holder
and front bracket
Clearance bet. holder
and bush for rear
GS7W3-205
bracket
Clearance bet.
kingpin case and
bush
GS7W3-206
111
Referential Value
0.10 to 0.30 {0.004 to 0.012}
0 to 0.10 {0 to 0.004}
0.25 to 0.35 {0.01 to 0.014}
Referential Value
0.20 to 0.40 {0.008 to 0.016}
0.20 to 0.40 {0.008 to 0.016}
Clearance of Bush
1. Inspect the clearance of the bush for front and rear
bracket and change the ones exceeding the usable
limit.
Item Referential Value
0.03 to 0.065
{0.0012 to 0.0026}
0.03 to 0.08
{0.0012 to 0.003}
2. Inspect the clearance of the bush for final case and
change the ones exceeding the usable limit.
Item Referential Value
0.03 to 0.08
{0.0012 to 0.003}
7
(Unit: mm {in})
(Unit: mm {in})
(Unit: mm {in})
Usable
Limit
0.20
{0.008}
0.20
{0.008}
(Unit: mm {in})
Usable
Limit
0.20
{0.008}