Assembly And Installation Of Mid Pto - Cub Cadet 7530 Maintenance Manual

www.mymowerparts.com
46T
41T
24T
Grease
Oil
K&T Saw Shop 606-678-9623 or 606-561-4983
Transmission
5.7
1 Assembly of MID PTO
1. Clean each part sufficiently and assemble.
2. Make sure that snap rings and spring pins are
securely attached.
Oil
3. Apply oil to the O-ring and needle bearing for
assembly.
4. Apply lithium grease to the oil seal for assembly.
5. Assemble as shown in the drawing for the spur
gears with specified mounting direction (edgy or
chamfered side).
GZ3W24-040
74
Assembly and Installation of
MID PTO
5