Table of Contents
Advertisement
More
Delete all
Select
Yes
OK
Activating Caller filter
Attention: If you activate the Caller filter and configure the accept list,
the handset accepts calls only from the numbers in the
caller filter list. If you configure the block list, the handset
blocks all calls from the numbers in the caller filter list.
To activate an accept or block list, perform the following steps:
Caller filter
4. Press the
Up
5. Press the
More
6. Press the
Up
all
option.
7. Press the
Select
8. Press the
Yes
9. Use the
Dialpad
10. Press the
OK
11. Press the
Clr
idle display.
1. Open the
Caller filter
"Accessing the Caller filter menu" (page
or
Down
key to highlight any entry.
soft key.
or
Down
key to highlight the
soft key.
soft key to confirm the changes.
to enter the PIN code.
soft key.
key one or more times to return to the
menu using the steps in
Telephone settings
Delete
204).
208
Advertisement
Table of Contents
