Connecting The Router - TP-Link TL-R470T+ User Manual

The Router can be grounded via the PE （Protecting Earth） cable of the AC power supply as shown
in the following figure.
Note:
If you intend to connect the Router to the ground via the PE（Protecting Earth）cable of AC power
cord, please make sure the PE（Protecting Earth）cable in the electrical outlet is well grounded in
advance.

2.5 Connecting the Router

Before you install the router, you should connect your PC to the Internet through your broadband
service successfully. If there is any problem, please contact with your ISP for help. After that,
please install the router according to the following steps. Don't forget to pull out the power plug
and keep your hands dry.
1. Power off your PC(s), Cable/DSL modem, and the router.
2. Connect the PC(s) and all Switches/Hubs on your LAN to the LAN Ports on the router, shown
in figure 2-3.
TL-R470T+ Load Balance Broadband Router User Guide
5