Balance Policy - TP-Link TL-R470T+ User Manual

To add a dispatch rule:
Step 1: Click Add New... button, you will see the following screen.
•
Enable - Make the scheduler rule enabled.
•
Rules Select - The direction rule of the datagram get through the WAN port.
•
IP Address (range) - The LAN IP or IP range which the extra IP address dispatch rules
take effect on. Such as 192.168.0.100 or 192.168.0.115~192.168.0.120.
•
Port (range) - The port or port range which the extra IP address dispatch rules take
effect on. It should be between 1 ~ 65534.
•
Protocol - The protocol which the extra IP address dispatch rules take effect on, either
TCP, UDP, or All (all protocols supported by the router).
•
Datagram Pass Policy - To decide how the datagram pass the WAN, Priority or Only.
If Priority is selected, the datagram will be preferentially forwarded by the specified
WAN port path. If Only is selected, the datagram will only be able to pass through the
specified WAN port.
•
Transmit Path - The WAN port name which the transmission uses.
Step 2: Select the Rules Select, Protocol, Datagram Pass Policy and Transmit Path, and
enter the IP address and Port range.
Step 3: Click Save to apply your setting.
4.3.7

Balance Policy

Choose menu "Network→Balance Policy",
The policy mainly depends on 2 solutions: IP address pair priority and Application priority. So, we
create 2 tables for these solutions. They are Existed-IP-Pair-Table and Existed-Application-Table.
It is recommended to keep the default settings if you are not sure whether you can set them
better.
TL-R470T+ Load Balance Broadband Router User Guide
you can configure the scheduler policy of the WAN.
33