Factory Defaults; Backup And Restore - TP-Link TL-R470T+ User Manual

4) The router will reboot after the upgrading has been finished.

4.13.4 Factory Defaults

Choose menu "System Tools→Factory Defaults", you can restore the configurations of the
Router to factory defaults on the screen (shown in Figure 4-69).
Click the Restore button to reset all configuration settings to their default values.
Note:
1) The default User Name is admin.
2) The default Password is admin.
3) The default IP Address is 192.168.0.1.
4) The default Subnet Mask is 255.255.255.0.
All settings you have saved will be lost when the default settings are restored.

4.13.5 Backup and Restore

Choose menu "System Tools→Backup and Restore", you can save the current configuration of
the Router as a backup file and restore the configuration via a backup file (shown in Figure 4-70).
To back up the Router's current settings:
Step 1: Click the Backup button (shown in Figure 4-70), click Save button in the next screen
(shown in Figure 4-71) to proceed.
TL-R470T+ Load Balance Broadband Router User Guide
Figure 4-69
Figure 4-70
74