Dhcp Settings - TP-Link TL-R470T+ User Manual

Click any of them, and you will be able to configure the corresponding function. The detailed
explanations for each submenu are provided below.
4.4.1

DHCP Settings

Choose menu "DHCP→DHCP Settings", you can configure the DHCP in the next screen (shown
in Figure 4-18).
The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which
provides the TCP/IP configuration for all the PCs that are connected to the router on the LAN.
DHCP Server - Enable or disable the DHCP server. If you disable the Server, you must
have another DHCP server within your network or else you must manually configure the
computer.
Start IP Address - This field specifies the first address in the IP address pool. The default
address is 192.168.0.100.
End IP Address - This field specifies the end address in the IP address pool. The default
address is 192.168.0.199.
Address Lease Time - This is the amount of time in which a network user will be allowed
connection to the router with their current dynamic IP address. Enter the amount of time (in
minutes), the range of the time is 1 ~ 2880 minutes. The default value is 120 minutes.
Default Gateway - Suggest inputting the IP address of the LAN port of the router, default
value is 192.168.0.1. (Optional)
Default Domain - Input the domain name of your network. (Optional)
Primary DNS - Input the DNS IP address provided by your ISP. You can consult your ISP
for it. (Optional)
Secondary DNS - Input the IP address of another DNS server if your ISP provides two DNS
servers. (Optional)
TL-R470T+ Load Balance Broadband Router User Guide
Figure 4-18
36