Lan - TP-Link TL-R470T+ User Manual

WAN Number – Here allows you to select the total number of WAN ports at your need. And
the Router will adjust the physical ports accordingly, which can be illustrated on the following
port sketch.
Note:
1) By default, TL-R470T+ is set to work at the mode of dual WAN ports.
2) The previous configurations will be cleared if the number of WAN/LAN ports is changed.
4.3.2

LAN

Choose menu "Network→LAN", you can configure the IP parameters of the LAN on the screen
below.
MAC Address - This field displays the physical address of the LAN. The value can't be
changed.
IP Address - Enter the IP address for the LAN of the Router, the formal is in dotted-decimal
notation (the factory default value is 192.168.0.1).
Subnet Mask - Enter the subnet mask for the LAN of the Router, this address code
determines the size of the network. Normally use 255.255.255.0 as the subnet mask.
TL-R470T+ Load Balance Broadband Router User Guide
Figure 4-3
Figure 4-4
16