The Back Panel; Chapter 2. Connecting The Modem Router - TP-Link TD-9970B User Manual

TD-W9970/TD-W9970B

1.3.2 The Back Panel

VDSL: Through the port, you can connect the modem router with the telephone. Or you can

connect them by an external separate splitter. For details, please refer to
Modem Router.
LAN4/WAN, LAN3, LAN2, LAN1: Through these ports, you can connect the modem router to

your PC or the other Ethernet network devices. In wireless router mode you will be able to
connect to Cable/FTTH/VDSL/ADSL device.
USB: The USB port connects to a USB storage device, a USB printer or a 3G/4G Modem.

WiFi: The switch for the WiFi function. Press the button to enable/disable the WiFi function.

WPS/RESET: The switch for the WPS function or resetting the modem router.

WPS function: For details, please refer to
•
Reset the modem router: There are two ways to reset the modem router's factory
•
defaults.
Method one: With the modem router powered on, use a pin to press and hold the
WPS/Reset button for at least 5 seconds. And the modem router will reboot to its factory
default settings.
Method two: Restore the default setting from
router's Web-based management page.
ON/OFF: The switch for the power.

POWER: The Power plug is where you will connect the power adapter.

Antennas: Used for wireless operation and data transmit.

300Mbps Wireless N USB VDSL/ADSL Modem Router User Guide
Figure 1-2
6
4.8.2 WPS Settings.
4.22.7 Factory Defaults
2.3 Connecting the
of the modem