Ip Nat Table - TP-Link TL-R470T+ User Manual

Statistics Table - This table displays the statistics information about the traffic.
IP Address
MAC Address
Packets
Total
Bytes
Packets
Bytes
Current
ICMP Tx
UDP Tx
TCP SYN
Tx
Note:
1) If the Current Statistics Status function is disabled, the DoS protection in Advanced
Security will be ineffective.
2) Select the Auto-refresh, then the traffic information will be refreshed automatically
during the Packets Statistics Interval. Click the Refresh button to refresh the information
in the table immediately.
Click the Auto-refresh checkbox to refresh automatically.
Click the Refresh button to refresh immediately.
Click the Reset All button to recount again.
Click the Delete All button to delete all the number.

4.13.11 IP NAT Table

Choose menu "System Tools→IP NAT Table", you will see the IP NAT in the table below:
Out Link - The WAN port which links the router.
Protocol Type - The protocol which is used in the link.
TL-R470T+ Load Balance Broadband Router User Guide
The IP address whose statistics information are displayed
The total amount of packets received and transmitted by the
router
The total amount of bytes received and transmitted by the router
The total amount of packets received and transmitted in the last
"Packets Statistic interval" seconds
The total amount of bytes received and transmitted in the last
"Packets Statistic interval" seconds
The total amount of the ICMP packets transmitted to WAN in the
last "Packets Statistic interval" seconds
The total amount of the UDP packets transmitted to WAN in the
last "Packets Statistic interval" seconds
The total amount of the TCP SYN packets transmitted to WAN in
the last "Packets Statistic interval" seconds
Figure 4-78
79