Mac Clone; Load Balance - TP-Link TL-R470T+ User Manual

DNS Server IP Address - Enter the correct DNS IP address that really existed on the WAN
network. For example: 202.96.134.133.
4.3.5

MAC Clone

Choose menu "Network→MAC Clone", you can configure the MAC address of the WAN on the
screen below (shown in Figure 4-13).
Some ISPs require that you register the MAC address of your adapter, which is connected to your
cable, DSL modem or Ethernet during installation. You do not generally need to change anything
here.
WAN MAC Address (1~2) - This field displays the current MAC address of the WAN port,
which is used for the WAN port. If your ISP requires that you register the MAC address,
please enter the correct MAC address into this field. The format for the MAC address is
XX-XX-XX-XX-XX-XX (for example: 00-0A-EB- E6-B9-49).
Your PC's MAC Address - This field displays the MAC address of the PC that is managing
the router. If the MAC address is required, you can click the Clone MAC Address button
and this MAC address will fill in the "WAN MAC Address" field.
Note:
1) Click Restore Factory MAC to restore the MAC address of WAN port to the factory
default value.
2) Only the PC(s) on your LAN can use the MAC Address Clone feature.
3) After you finish the configuration, click the Save button, and the router will prompt you to
reboot.
4.3.6

Load Balance

Choose menu "Network→Load Balance", the following screen will display. In which, you can
determine how the traffic load is shared by the WAN ports, and get the information about the
router's traffic status of WAN ports on Current Statistics and Overall Statistics tables.
TL-R470T+ Load Balance Broadband Router User Guide
Figure 4-13
29