Dmz - TP-Link TL-R470T+ User Manual

Step 3: After that, select Enabled to make the entry take effect.
Step 4: Click Save button to save the configuration.
Note:
1) If you want to add more than one reserved IP, please go to step 1 to continue.
2) When the trigger connection is released, the according opening ports will be closed.
3) Each rule allowed to be used only by one host on LAN synchronously. The trigger
connection of other hosts on LAN will be refused.
4) Incoming Port Range cannot overlap each other.
Other configurations for the entries as shown in Figure 4-26:
Click the Delete button to delete the entry.
Click the Enable All button to enable all the entries.
Click the Disable All button to disable all the entries.
Click the Delete All button to delete all the entries.
Click the Previous button to view the information in the previous screen, click the Next button to
view the information in the next screen.
4.5.3

DMZ

Choose menu "Forwarding→DMZ", you can view and configure DMZ host in the screen (shown
in Figure 4-27).
The DMZ host feature allows one local host to be exposed to the Internet for a special-purpose
service such as Internet gaming or videoconferencing. DMZ host forwards all the ports at the
same time. Any PC whose port is being forwarded must have its DHCP client function disabled
and should have a new static IP address assigned to it because its IP address may change when
using the DHCP function.
TL-R470T+ Load Balance Broadband Router User Guide
Figure 4-26
42