Ap Router / Ap / Client Bridge Modes - EnGenius ETR9360 User Manual

11

6.2 AP Router / AP / Client Bridge Modes

There are three main modes to select from which will influence the installation of the TRAVEL ROUTER. This section will
help you determine which mode works with your setup.
AP Router Mode
AP Router Mode allows you to share an Internet connection to multiple computers.
AP Mode
AP mode establish a network with the Access Point. It does not have NAT function and the ability connecting to internet.
Client Bridge Mode
Client Bridge Mode allows a wired network device to connect to your wireless network, or create a point-to-point bridge.
Change modes from the top-right of the User Interface.
Please see Configuring the TRAVEL ROUTER for instructions to access the Web-Based User Interface.