EnGenius ETR9360 User Manual page 67
Wireless n pocket ap/router
Hide thumbs
Also See for ETR9360:
- Technical specifications (6 pages) ,
- Quick installation manual (2 pages) ,
- Quick start manual (3 pages)
Table of Contents
Advertisement
66
Basic
Radio:
Enable or Disable the device's wireless signal.
Mode:
Select between Access Point or Wireless Distribution System (WDS)
modes.
Band:
Select the types of wireless clients that the device will accept.
eg: 2.4 GHz (B+G)
Only 802.11b and 11g clients will be allowed.
Enable SSID#:
Select the number of SSID's (Wireless Network names) you would like.
You can create up to 4 separate wireless networks.
Enter the name of your wireless network. You can use up to 32
SSID#
characters.
Auto Channel:
When enabled, the device will scan the wireless signals around your
area and select the channel with the least interference.
Channel:
Manually select which channel the wireless signal will use.
Check Channel
When Auto Channel is Enabled, you can specify the period of the
Time:
device will scan the wireless signals around your area.
Advertisement
Table of Contents
