EnGenius ETR9360 User Manual page 102

101
Destination
192.168.1.0
192.168.0.0
So if, for example, Client3 wants to send an IP data packet to 192.168.0.2 (Client 2), it would use the above table to
determine that it had to go via 192.168.123.103 (Router 2)
And if it sends Packets to 192.168.1.11 (Client 1) will go via 192.168.123.216 (Router 1).
Subnet Mask Gateway
255.255.255.0 192.168.123.216
255.255.255.0 192.168.123.103
Hop Interface
1 LAN
1 LAN