EnGenius ETR9360 User Manual page 65
Wireless n pocket ap/router
Hide thumbs
Also See for ETR9360:
- Technical specifications (6 pages) ,
- Quick installation manual (2 pages) ,
- Quick start manual (3 pages)
Table of Contents
Advertisement
64
Layer-2 Tunneling Protocol (L2TP)
WAN Interface
Select whether the ISP is set to Static IP or will allocate Dynamic IP
Type:
addresses.
Hostname:
This is optional. Only required if specified by ISP
MAC:
The MAC Address that is used to connect to the ISP.
Login:
Username assigned to you by the ISP
Password:
Password for this username.
Service IP Address:
The IP Address of the PPTP server.
MTU:
The maximum size of packets.
Do not change unless mentioned by the ISP.
Type:
You can choose the method that the router maintains connection with
the ISP.
Keep Connection: The device will maintain a constant connection with
the ISP.
Automatic Connection: The device will only initiate connection to the
ISP when there is an Internet connection request made from a LAN
device.
Manual Connection: The user will need to manually connect to the ISP
by clicking the Connect button.
Idle Timeout:
When the connection type is Automatic Connection, when Internet
traffic is idle, then the device will automatically disconnect from the ISP.
Please specify the Idle time in minutes.
Advertisement
Table of Contents
