Page 1
Connect the power adapter supplied with the ETR9650 to the power socket on the back of this device. Check to see that the power LED on the front of the panel of the ETR9360 is turned ON. STEP 2 Connect ETR9360 LAN port & PC/Notebook RJ45 port with network cable.
Page 2
Step 4 Use the following setting for local ISP. Select ‘Internet’ and Select ‘3G’ on WAN Access Type. Singtel Starhub APN Code Internet Sunsurf Shwap Dial Number *99# *99# *99# Step 5 Click ‘Wireless’ and select ‘Basic Settings’ to change SSID to desired identity and Click ‘Apply Changes’...
Page 3
Step 6 Note Setup WiFi Security Once setup is completed, power off modem and router. Power up the modem and router at the same time and wait for both the Click on ‘Wireless’ and Click on ‘Security’ to define WiFi encryption. modem and router to completely initialize.