ADTRAN Express 3010 Manual page 83

S54 PROTOCOL
TYPE
S55 DIAL MODE
S56 ECHO TONE
S58 CALL
SCREENING
S59 CHANNEL RATE
SS60 SPID1 LOC
SS61 SPID2 LOC
SS62 LDN1 LOC
SS63 LDN2 LOC
S65 AUTOSPID
SS67 AREA CODE
61200239L1-20 Express 3010/3110 User Manual
Appendix A. AT Commands and S-Registers
Rate adaption protocol type.
1=Clear Channel
2=Bonding
5=V.110
6=V.120
11=Fallback
12=PPP
Selects dialing interface.
0=None
2=AT commands
3=V.25 bis dialing
Enables an echo tone which suppresses the
echo cancellers in a voice circuit. Can be used
to trick the switch to allow sending data over a
line optioned for voice ISDN service.
0=None
1=Answer
2=Originate
3=Both
Allows the Express to screen incoming calls.
0=Answer any call
1=Answer only calls from numbers matching
those stored in SN0 through SN9.
Sets the available network bandwidth when the
Express is in leased mode.
1=64 kbps
2=128 kbps
SPID string location.
SPID string location.
ISDN phone number string location.
ISDN phone number string location
Sets the AutoSpid determination feature.
0=Disable (default)
1=Enable
Area code location.
A-13