ADTRAN Express 3010 Manual page 79

S-REGISTER LIST
Defaults appear in bold type in the third column.
S0 AUTO ANSWER
S2 ESCAPE
CHARACTER
S3 END OF LINE
CHARACTER
S4 LINE FEED
CHARACTER
S5 BACK SPACE
CHARACTER
S7 CONNECT
TIME
61200239L1-20 Express 3010/3110 User Manual
Appendix A. AT Commands and S-Registers
Determines how the Express answers an
incoming call.
0 = Disable (Express does not answer call).
1 = Enable (Express answers all calls).
2 = Dump all calls.
Determines which key or character (in ASCII
code) defines the escape command. The
standard escape character is a plus (+) sign
(ASCII value of 43 decimal). To change the
character set, set S2 to the desired ASCII value.
Range = 0 to 127
Determines which key or character (in
ASCII code) ends a command line. The
standard end-of-line character is the carriage
return (ASCII value of 13 decimal).
Range = 0 to 127
Determines which key or character (in
ASCII code) advances the cursor to the next line
after ending a command line or after an
Express message. The standard character is the
line feed (ASCII value of 10 decimal).
Range = 0 to 127
Determines which key moves the cursor back
one space to erase a character. The standard
character is the backspace (ASCII value of 8
decimal).
Range = 0 to 127
Determines how long the Express waits for an
outgoing call to be answered.
15 = 15 seconds
30 = 30 seconds
60 = 1 minute
120 = 2 minutes
240 = 4 minutes
A-9