ADTRAN Express 3010 Manual page 80

Appendix A. AT Commands and S-Registers
S12 ESCAPE TIME
S13 AutoSpid
Download
S14 MISC BITS
S15 ASYNC
BONDING
S22 MSG BITS
S24 V120 LLC
A-10 Express 3010/3110 User Manual
Determines the delay required immediately
before and after entering the escape command
for the Express to recognize and execute the
command.
Range = 0 to 127 (Default = 50)
0 = Enabled
1 = Disabled
Miscellaneous bits (bit 8 is most significant bit).
Bit 2 = 1:Enables on screen echo of AT
commands.
Bit 2 = 0:Disables on screen echo of AT
commands.
Bit 3 = 0:Enables AT responses from the
Express.
Bit 3 = 1:Disables AT responses from the
Express.
Bit 4 = 1:Enables AT responses to be displayed
in text form.
Bit 4 = 0:Enables AT responses to be displayed
in numeric form.
Bit 7 = 1:Disable PPP ACCM spoofing.
Bit 7 = 0:Enable PPP ACCM spoofing.
Bit 8 = 1:Ring indicator uses cadence.
Bit 8 = 0:Ring indicator remains on.
Asynchronous BONDING method.
0 = ADTRAN revision 0 (default)
1 = Multi-vendor option
Miscellaneous message bits (bit 8 is most
significant bit).
Bit 5= Bit 6 = Bit 7 = 1 Allows connect
message with baud rate.
Bit 5= Bit 6 = Bit 7 = 0 Connect message
without baud rate.
Enables/disables V120 lower layer
compatibility (LLC).
0 = Enabled
1 = Disabled
61200239L1-20