ADTRAN Express 3010 Manual page 103

Loop Status Messages
Appendix D
This appendix lists the status line messages and their definitions.
Messages shown entirely in capital letters are generated by the ISDN
network. Messages with lower case letters are generated by the Ex-
press 3010.
AutoSpid X
The SPID is being attempted by the AutoSpid determination. X starts
at 0 and counts up for each SPID tried.
Call Connect B1
Bearer channel 1 is connected and is active.
Call Connect B2
Bearer channel 2 is connected and is active.
Call Connect B1/B2
Bearer channels 1 and 2 are active.
Disconnecting
The current phone call is being disconnected (hung up).
Getting TEI #1
The Express 3010 is receiving its first TEI from the network.
Getting TEI #2
The Express 3010 is receiving its second TEI from the network.
61200239L1-20 Express 3010/3110 User Manual D-1