Table of Contents
Advertisement
Upgrading Software
Chapter 4
As features are added to the Express, software upgrades may be nec-
essary. The Express has flash memory allowing the software to be up-
graded from a file provided by ADTRAN. The current version of the
software can be found on the Status menu in the VT 100 Terminal Em-
ulation menus.
The software can be upgraded using HyperTerminal or any terminal
emulation package supporting the XMODEM or XMODEM 1K proto-
cols. Please proceed to the appropriate section for further instruction.
If a terminal emulation package other than HyperTerminal is selected,
please see the instructions supplied with the package to set up an
XMODEM or XMODEM 1K connection.
Using HyperTerminal to Upgrade Software
1.
Download the necessary upgrade files from the ADTRAN web
site (www.adtran.com).
2.
From the Start button, choose Programs; then choose Accesso-
ries, then HyperTerminal.
3.
When the Connection Description window appears, type in a
connection name, select an icon, and click OK.
4.
In the Connect To window, select the COM port to which the
Express is connected in the Connect using field and click OK.
5.
The COM port Properties window appears next. Change the
Bits per second field to 57600 and click OK.
6.
You are now connected. Next type AT!FLASHLOAD to initiate
the firmware update. The AT command will not be visible since
echo is off by default. To enable echo, type ATE1.
7.
Click on the Transfer menu; then click Send File... .
8.
Click Browse to locate the directory and file to download to the
Express.
61200239L1-20
Express 3010/3110 User Manual
4-1
Advertisement
Table of Contents
