ADTRAN Express 3010 Manual page 75

&F5 Configures unit for Leased 128k (not in S/T unit)
&F6 Configures unit for Ldm 128k Master (not in S/T
unit)
&F7 Configures unit for V120 async
&F8 Configures unit for Dial Bond async
&F9 Configures unit for Internet 64k
&F10 Configures unit for Internet 128k
&F11 Configures unit for Remote 64k
&F12 Configures unit for Remote 128k
&F13 Configures unit for Leased V120
Network Options
&L0 Dial network
&L1 Leased network (not in S/T unit)
&L2 Leased, backed up by dial network
Calling Number Identifiers
&N0 Number 1. Read far-end phone number 1 if service
subscribed from telephone company.
&N1 Number 2. Read far-end phone number 2 if service
subscribed from telephone company.
DTE Data Type Options
&Q0 DTE is async
&Q1 DTE is sync
Clear-To-Send (CTS) Control Line Options
&R0 Follows RTS
&R1 Forced CTS
61200239L1-20 Express 3010/3110 User Manual
Appendix A. AT Commands and S-Registers
A-5