Table of Contents
Advertisement
Setup
4. Mounting the MVPs
Orientation
Truss Installation
Step 2
Step 1
MVP™ Ta Rig Kit sold separately.
Rig Kit Installation
Procedure
MVP™ Ta8 Curve User Manual, Rev. 1
Each MVP™ Ta8 Curve is a solid frame constructed of aluminum alloy and stainless
steel. This ensures each panel is stable and easy to install. Each panel also has a
convenient pop-out handle located on the top, outside, of the panel. This handle enables
you to easily pick up and securely hold each panel while mounting and working with the
panels.
The MVPs can be assembled to provide any number of modular designs. The panels on
the top can be securely hung from a truss or other stable surface. Always hang in a safe
position with adequate space for ventilation, configuration, and maintenance.
CHAUVET® recommends following the general guidelines below.
• When selecting an installation location, consider ease of access for operation and
routine maintenance.
• Make sure to hang away from any flammable material, as indicated in the
Notes.
• Never mount in places where rain, extreme temperature changes, or restricted
ventilation may affect the panels.
• Make sure that the structure to which you are hanging the panels can support the
weight.
Please see the
Technical Specifications
requirement of each MVP™ Ta8 Curve.
Refer to the following diagram for truss installation. CHAUVET® offers the MVP™ Ta
Rig Kits (sold separately) specifically designed for hanging the panels. Each clamp is
designed and labeled for mounting on a specific side.
Use the following instructions to join your panels to a truss using a MVP™ Ta RKR/RKL
rig kit. Each step corresponds to the number in the diagram.
1. Release quick lock lever as shown in step 1. Using the block behind the lever, push
up on the mechanism revealing the nipple.
2. Place the clamp on top of the panel aligning the slot with the loop rod and the nipple
on the top of the panel.
3. Allow looped rod to fit over rig clamp tab.
4. Push down on fast lock lever to securely lock clamp in place.
section of this manual for the weight
Step 3
Step 4
Safety
7
Advertisement
Table of Contents
