Joining Each Mvp™ (Creating A Modular Design); Vertically Joining The Panels; Vertical Joining Procedure - Chauvet MVP Ta8 Curve User Manual

5. Joining Each MVP™ (Creating a Modular Design)
Vertically Joining
the Panels
Vertical Joining
Procedure
8-
Each MVP™ Ta8 Curve is joined together to create a modular designed video wall.
Because the panels are interchangeable, you can create a video wall by joining several
of the same model or joining different models to create a larger or more complex video
wall.
Each MVP™ Ta8 Curve can be easily joined vertically using the 2 fast locks located at
the top corner of each panel and the vertical rigging located on the bottom of the panel at
each corner. These connectors can be recessed if not being used.
Step 1
Use the following instructions to join your panels vertically. Each step corresponds to the
number in the diagram.
1. Release fast lock lever as shown in step 1. Using the block behind the lever, push
up on the mechanism revealing the nipple.
2. Place the panel on top of the panel aligning the slot with the loop rod and the nipple
on the top of the panel.
3. Allow looped rod to fit over rig tab on the panel.
4. Push down on fast lock lever to securely lock the panel in place.
Joining Each MVP™ (Creating a Modular Design)
Step 3
Step 2
Step 4
MVP™ Ta8 Curve User Manual, Rev. 1