CONTACT US ..................................14 CHAUVET®, 2010, All Rights Reserved Information and specifications in this User Manual are subject to change without notice. CHAUVET® assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. Author: Anthony Chiappone...
In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Manual Conventions CHAUVET® manuals use the following conventions to differentiate certain types of information from the regular text. EANING...
Safety Instructions Please read these instructions carefully. It includes important information about the installation, usage and maintenance of this product. • Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet. •...
Laser Safety and Operating Instructions Stop and read all laser safety data. Laser Light is different from any other light sources with which you may be familiar. The light from this product can potentially cause eye injury if not set up and used properly. Laser light is thousands of times more concentrated than light from any other kind of light source.
Laser Exposure Warning Laser light Avoid direct eye exposure Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard “For Safe Use of Lasers”, available from the Laser Institute of America: www.laserinstitute.org. Many local governments, corporations, agencies, military and others, require all lasers to be used under the guidelines of ANSI Z136.1.
2. I NTRODUCTION Product Overview Mode Button LED Indicator Microphone Laser Output Wireless Remote Receiver Green Laser Dimmer Cooling Fan 12 V Power In 2. Introduction 12/7/2010 9:44 AM...
This fixture includes an external power supply which is auto-ranging and runs on 100~240 VAC, 50/60 Hz power. Only use the included power supply! To obtain a replacement power supply, contact Chauvet®. To determine the power requirements for a particular fixture, see the label affixed to the back plate of the fixture or refer to the fixture’s specifications chart.
Mounting Orientation The MiN™ Laser FX/RGX/STAR may be mounted in any position provided there is adequate room for ventilation. Rigging Be sure that the structure can support the weight of the fixture. Please see the “Technical Specifications” section of this manual for a detailed weight listing. Mount the fixture securely. Do this with a screw, nut and bolt, or a hanging clamp.
4. O PERATING NSTRUCTIONS Manual Mode Access the five different operating modes available in this fixture by using the <MODE> button on the front panel. Press <MODE> to cycle through the modes. Please see a description of each mode below. Mode Description Sound-active A...
#32. • Keep DMX cables separated from • Interference from AC wires power cables or black lights. If you still have a problem after trying the above solutions, please contact CHAUVET® Technical Support. 4. Operating Instructions 12/7/2010 9:44 AM...
Package must be clearly labeled with a Return Merchandize Authorization Number (RMA #). Products returned without the RMA # will be refused. Call CHAUVET® and request an RMA # prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return.