Set Up Instructions - Stamina 5125u Owner's Manual

SET UP INSTRUCTIONS

5125u Magnetic Bike
Place the
approximately 34 1/4" long x 19 1/8" wide x 53 3/8" tall. An area 4 feet wide x 5 feet long is required for safe
5125u Magnetic Bike
operation of the
passage around the
LEVELING: Adjust the
the floor without rocking. Remove and reposition the
STABILIZER(3)
5125u Magnetic Bike
MOVING: The
Grasp on the
Bike
.
FUNCTION INSPECTION:
Visually inspect the
Check the function of the
to verify that the drive train functions properly. Adjust the
properly.
Locate and read the
CAUTION:
users read the
in the area where it will be used. The
5125u Magnetic Bike
LEVELING CAPS(45)
to level the
REAR STABILIZER(3)
5125u Magnetic Bike
5125u Magnetic Bike
Warning Label(66)
Warning Label(66).
. Make sure that adequate space is available for access to and
.
REAR STABILIZER(3)
on the
5125u Magnetic Bike.
must be lifted for movement. Two people may be required.
HANDLEBAR(5)
and
to verify that assembly is as shown in the above illustration.
. Turn the crank slowly through one complete revolution
TENSION KNOB(25)
on the
10
5125u Magnetic Bike
so that the Bike sets on
LEVELING CAPS(45)
to move the
and verify that it functions
5125u Magnetic Bike
is
REAR
on the
5125u Magnetic
. Make sure that all