Hardware Illustrations; Hardware Identification Chart - Stamina 5125u Owner's Manual

HARDWARE IDENTIFICATION CHART

This chart is provided to help identify the hardware used in the assembly process. After unpacking the unit,
open the hardware bag and make sure that you have the following items:
3/16"
0 1/2
0 10 20
6
Length
NOTE: Nylock Nut(M8 x 1.25)(56) and Washer(M8)(64) may attached under the Seat by the factory.
1/4" 5/16"
1 1/2 2
30 40 50
8 10
Part No. and Description
47
49
59
62
63
64
56
3/8" 1/2"
1/2 3 1/2
60 70 80 90
12 Place washers, the end of bolts or screws on the
circles to check for the correct size. Use the small
scale to check the sizes of bolts and screws.
Carriage Bolt (M8 x 1.25 x 65mm)
Bolt, Button Head (M8 x 1.25 x 20mm)
Acorn Nut (M8 x 1.25)
Arc Washer (M8)
Lock Washer (M8)
Washer (M8)
Nylock Nut (M8 x 1.25)
5
INCHES
4 1/2 5
100 110 120 130 140 150
MILLIMETERS
1/2 6
in.
mm.
Qty
4
7
4
11
11
3
3