Stamina 5125u Owner's Manual page 7

ASSEMBLY INSTRUCTIONS
STEP 3
NOTE: RIGHT PEDAL(35)
The
has right hand threads and is tightened by turning clockwise. The
stamped on the end of the pedal shaft. The
tightened by turning counter clockwise.
RIGHT PEDAL(35)
Thread the
Do the same to attach the
STEP 4
SEAT(43)
Attach the
STEP 5
BELLOWS(40)
Slide
ADJUSTMENT KNOB(42).
and secure with the
NOTE:
ADJUSTMENT KNOB(42)
The
securely in the
R
has stamped on the end of the pedal shaft. The
onto the right side of the
LEFT PEDAL(34)
SEAT POST(6)
onto the
SEAT POST(6).
over the
MAIN FRAME(1).
LEFT PEDAL(34)
CRANK(7)
onto the left side of the
NYLOCK NUTS(M8)(56)
with
SEAT POST(6)
Insert the
should be screwed in tight to make the
7
RIGHT PEDAL(35)
LEFT PEDAL(34)
has left hand threads and is
as shown. Tighten the pedal securely.
CRANK(7).
WASHERS(M8)(64).
and
MAIN FRAME(1)
into the
SEAT POST(6)
L
has
fit