Cisco ASR 900 Series Release Notes page 275

Chapter
Workaround: There is no workaround.
CSCud09813
•
Symptom: Timestamping does not work in CFM over cross-connected MEP with port channel.
Conditions: This issue is observed when you configure CFM over cross-connected MEP with port
channel from a Cisco ASR 903 router to a Cisco ME 3600 switch.
Workaround: There is no workaround.
CSCud12624
•
Symptom: Traceback is displayed when you configure the ACR group.
Conditions: This issue is observed when you configure an ACR group.
Workaround: There is no workaround.
CSCud29491
•
Symptom: A two-level policy with match EFP in parent and PHB-based policy in child can be
applied.
Conditions: This issue is observed when you apply a policy on a physical interface having EFPs on
that physical interface.
Workaround: There is no workaround. This configuration is not supported.
CSCud34630
•
Symptom: The following error message is displayed on the standby machine while using the
shutdown and no shutdown commands on the ACR controller:
NETWORK_RF_API-3-FAILDECODEDATADESC
Conditions: This issue is observed on the standby machine when you configure ACR interface.
Workaround: There is no workaround.
CSCud35689
•
Symptoms: The router accepts a queue-limit configuration at the parent level of a policy or at the
vlan class or port level.
Conditions: This issue is observed when you add a queue-limit configuration on a policy at the
parent level or at the vlan class or at port level.
Workaround: There is no workaround. This configuration is not supported.
CSCud35732
•
Symptom: The router does not apply egress CFM MIP filtering.
Conditions: This issue is observed when you overwrite a MIP configuration using the ethernet CFM
MIP level command.
Workaround: Instead of overwriting the MIP level configuration, remove and reapply the
configuration.
CSCud38038
•
Symptom: The router records incorrect delay measurements after a reload.
Conditions: This issue is observed under the following conditions:
–
–
–
OL-26630-12
You configure Delay Measurement Message (DMM) on a port-channel interface.
The port-channel member links are on different interface modules (IMs).
You reload the router.
Caveats in Cisco IOS XE 3.10S Releases
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
21