Cisco ASR 900 Series Release Notes page 149

Chapter
–
Workaround: There is no workaround.
CSCua38675
•
Symptoms: The router displays a QoS Stats Stalled error message and stops applying QoS
configurations.
Conditions: Occurs when you apply a flat VLAN policy to a trunk EFP interface.
Workaround: There is no workaround.
CSCua41400
•
Symptoms: QoS classification does not function properly.
Conditions: Occurs when you create QoS class containing a policy that classifies on both ACL and
DSCP value.
Workaround: There is no workaround.
CSCua43843
•
Symptoms: QoS classification fails when you configure the match vlan command under a
class-map.
Conditions: Occurs when the router is configured with an EVC with the encapsulation default
command.
Workaround: Change the encapsulation to dot1q.
CSCua52162
•
Symptoms: The router does not learn remote CFM MEPs on EFP interfaces.
Conditions: Occurs when you configure rewrite push operation on an EFP interface.
Workaround: There is no workaround.
CSCua52187
•
Symptoms: The router crashes when you attach a QoS policy.
Conditions: Occurs when you apply a QoS class-map that
–
–
–
Workaround: There is no workaround.
CSCua54547
•
Symptoms: The router does not learn remote CFM MEPs.
Conditions: Occurs under the following conditions:
–
–
–
Workaround: Configure the EFP encapsulation as untagged.
CSCua55122
•
Symptoms: The OC-3 interface module crashes when you create a high number of ATM IMA
interfaces.
OL-26630-12
255 EVCs configured on a port-channel and sending multicast traffic to a multicast group
Matches traffic based on an ACL
References an ACL not present in the running configuration
Is referenced in a policy with a DSCP marking action
The router is connected to the remote MEPs via a pseudowire connection.
The router is configured with MPLS on a bridge-domain interface
Dot1q encapsulation is configured on an EFP.
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
Caveats in Cisco IOS XE 3.7S Releases
61