Resolved Caveats-Cisco Ios Xe Release 3.10.1S - Cisco ASR 900 Series Release Notes

Asr 900 series
Hide thumbs Also See for ASR 900 Series:
Table of Contents

Advertisement

Chapter
Resolved Caveats—Cisco IOS XE Release 3.10.1S
This section documents the issues that have been resolved in Cisco IOS XE Release 3.10.1S.
OL-26630-12
Conditions: This issue occurs on performing ISSU when there is a IM FPGA change between the
releases.
Workaround: Perform the following:
Perform IM FPGA upgrade using the package file.
Proceed with ISSU.
CSCue60699
Symptom: Router auto negotiates full duplex with 1000M half/full duplex configuration.
Conditions: This issue occurs when a router with Copper SFP with auto-negotiating is enabled and
the peer router with Cu SFP configured with 1000M half-duplex mode exists.
Workaround: There is no workaround.
CSCug31550
Symptom: Incorrect TCAM entries with scale configuration are displayed after reapplying the
policy map.
Conditions: This issue occurs after removing the policy map and reapplying it to service instances.
Workaround: There is no workaround.
CSCug36190
Symptom: Object Download failures are seen when configuring xconnect on the main interface and
configure xconnect under the service instance.
Conditions: This issue occurs when xconnect is configured on the main interface.
Workaround: Remove the xonnect configuration from the main interface.
CSCug50280
Symptom: QoS does not work on the router.
Conditions: This issue occurs while adding user class to a port level policer dynamically when the
policer already has class-default configured.
Workaround: Reload the router.
CSCug68820
Symptom: The show inventory command does not display PSU and fan tray information.
Conditions: This issue occurs after the PSU or fan tray is inserted after bootup and SSO is
performed.
Workaround: Reload after PSU or the fan tray after it is inserted.
CSCug70182
Symptom: The ASR903-IMA8S port remains up without the fiber.
Conditions: This issue occurs when the GLC-FE-100FX optic is used.
Workaround: There is no workaround.
CSCug96284
Symptom: Memory leaks seen on boot up of the router.
Caveats in Cisco IOS XE 3.10S Releases
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asr 903

Table of Contents