Changing The Default Settings - Dell C2665dnf User Manual

4 Specify the copy settings below as required.
• Quantity
• Darken / Lighten
• Output Color
• Select Tray
• Sharpness
• Color Saturation
• Auto Exposure
For details, see "Setting Copy Options."
5 Tap Copy to begin copying.
After the front side of the ID card is scanned, the display prompts you to turn over the card.
To scan the back side of the ID card, turn the ID card over and tap Continue.
a
To finish copying, tap Print Now.
b
NOTE:
Color copy is secured with a password if the Function Enabled setting for
. If you set
Password)
On(Color Password)

Changing the Default Settings

The default settings of the copy menu options such as Output Color, Select Tray, and Darken/Lighten
can be set to the most frequently used modes. When you copy a document, the specified default settings are used
unless they are changed by using the operator panel.
The settings on Default Settings will be reflected when you create a new tile. If you change the settings on
Default Settings after creating the new tile, it does not affect the settings of the tile you created earlier. For
details about creating a new tile, see "Adding a New Tile."
To create your own default settings:
1 Press the (Information) button.
2 Tap the Tools tab, and then tap Default Settings.
3 Tap Copy Defaults.
4 Tap until the desired menu item appears, and then tap that menu item.
5 Tap the desired setting or enter the value, and then tap OK.
6 Repeat steps 4 and 5 as needed.
to
Output Color Full Color
, you will need to enter the four digit password.
is set to
Copy On(Color
and the Function Enabled setting for to
Copy
335
Copying